ATEQ D620 - Page 16

D620.388.00_QS_UK_01
16 / 42
Printer RS232 connector / Modbus (option) or Profibus (option)
(J12)
RS232 - SubD 9 pins male connector (printer)
RS232 for printer, bar code reader, PC connection.
Pin number Signal
1 Not used
2 RXD data input
3 TXD data input
4 Not used
5 Ground
6 Not used
7 RTS request to send
8 CTS clear to send
9 Not used
RS232 - SubD 9 pins female connector (Profibus) option
Profibus: SubD 9 pins female connector.
Pin number Signal
1 PE (ground)
2 Not used
3 Data line A
4 CNTR - A (repeater control
signal)
5 DGND (logic ground)
6 VP (supply)
7 Not used
8 Data line B
9 Not used
Devicenet connectors (J5) (J6) (option)
M12 type connector - 5 pins male connector (J5) (Devicenet input)
For connection to others ATEQ devices.
Pin number Signal
1 Drain
2 V+
3 V-
4 CAN_H
5 CAN_L