ATEQ D620 - Page 42

D620.388.00_QS_UK_01
42 / 42
Specifications
CHARACTERISTICS
Technical characteristics of the device.
Main characteristics
Characteristics Values
Case dimensions: Height x Width x Depth 150 x 250 x 270 mm
Overall dimensions 150 x 250 x 360 mm
Format Half 19-inch rack
Mass About 8 kg (17.6 lbs)
Electrical power supply — 100/240VAC - 50 W - 50/60 Hz
— 24VDC-2A.
Overvoltage category II
Pneumatic air supply (0 to 0.5 MPa range) Air supply: 0.6 MPa ± 15%
Pneumatic air supply (0.6 to 1 MPa range) — Regulator input: 1.2 MPa ± 10%
— Valves supply: 0.6 MPa ± 15%
Pneumatic air supply (1.1 to 2 MPa range) — Regulator input: instrument pressure range +
0.1 to 0.2 MPa
— Valves supply: 0.6 MPa ± 15%
Protection Device protection level IP2
Pneumatic connections: (inside / outside
diameters)
4/6 to 26 mm
Operation temperature +5 °C to + 45 °C (+ 41 °F to 113 °F)
Storage temperature 0 °C to +60 °C (32 °F to 140 °F)
Operation altitude Up to 2000 m (6500 ft)
Relative humidity 80 % at 31 °C (87 °F) and 50 % at 40 °C (104 °F)