• The tool is ready to program the data.
• Place the tool near the valve of the front left wheel.
• Press Trigger to start the programming.
• Start reading the tire's SGTIN96 code by RFID (contactless) on the Left Front wheel.
• On most tires the RFID tag is embedded in the tire's outer sidewall, however the exact
location is unknown.
• Move the tool in a large circular movement, at approximately 15 cm from around the
front left tire. Direct the tool’s RFID antenna - situated on the back of the device -
towards the sidewall.
• A beep indicates the correct reading of the RFID tag, and the SGTIN96 code is
displayed on the Front Left row.
To Next Page
Loading...
