39
40
Limited Product Warranty
(Applicable under normal application, installation, use and service conditions)
ATESS warrants the above listed products to be free from defects and/or failure
specified for a period from the date of sale as shown in the Proof of Purchase to
the Original purchaser.
The warranties described in these “Limited Warranties ” are exclusive and are
expressly in lieu of and exclude all other warranties, whether written, oral, express
or implied, including but not limited to, warranties of merchantability and of fitness
for a particular purpose, use ,or application, and all other obligations or liabilities
on the part of ATESS , unless such other obligations or liabilities are expressly
agreed to it in writing signed and approved by ATESS , ATESS shall have no
responsibility or liability whatsoever for damage or injury to persons or property, or
for other loss or injury resulting from any cause whatsoever arising out of or
related to the modules, including, without limitation, any defects in the modules or
from use or installation. Under no circumstances shall ATESS be liable for
incidental , consequential or special damages howsoever caused; loss of use,
loss of production, loss of revenues are therefore specifically and without
limitation excluded to the extent legally permissible, ATESS ’s aggregate liability,
if any, in damages or otherwise, shall not exceed the invoice as paid by the
customer.
The “Limited Product Warranties” described above shall not apply to, and ATESS
shall have no obligation of any kind whatsoever with respect to, any inverter which
has been subjected to:
—Misuse, abuse, neglect or accident;
—Alteration, improper installation or application;
—Unauthorized modification or attempted repairs;
—Insufficient ventilation of the product;
—Transport damage;
8.2 ATESS Factory warranty
warranty for the ATESS inverter products Possession of this certificate validates a
standard factory warranty from the date of purchase.
8 Appendix
VMAX DC (absolute maximum)
PV input operating voltage range
Maximum operating PV input current
ISC DC (absolute maximum)
8.1 Specification
Rating
ATESS HPS50
Model
DC input quantities
AC output quantities
Voltage (nominal or range)
Current (maximum continuous)
Frequency (nominal or range)
Power (maximum continuous)
Power factor range
Weight unit
Ingress Protection
Environmental category
Suitability for wet locations
Pollution degree
Elect.protection class
Overvoltage category
Mains connection
Transformer info
Insulation class
1000V
480-800V
125A
400Vac
80A
50Hz/60Hz
55kW
0.9lagging-0.9leading
600 kg
IP20
indoor
not
I
Class
Category I for AC output category II
for DC input
Permanent connection
With isolating Transformer
Class H
I
I
125A
50kW
BAT input operating voltage range
350V-600V（ ）MPP voltage-100V
180A
BAT Maximum operating DC input current
To Next Page
Loading...