45 46
Read data from the datalogger
Check if the cable connection is loose
Manual inspection of AC and DC circuit breakers
LCD stop function
Check if there is abnormal noise during the running of the machine
Check battery components for abnormalities, swelling, smoke
Period
Maintenance item
Dimension (W/H/D)
Weight
Environment temperature
Protection degree
Standby consumption
Cooling
Noise emission
Display
Communication interface
HPS10000TL/HPS7500TL
Model
7.2 Regular maintenance
Monthly
Monthly
Monthly
Monthly
Weekly
Daily
The energy storage controller must be regularly maintained to
ensure its normal operation and service life.
The recommended routine maintenance cycle and work contents
are shown in Table 7-2.
7.3 Waste treatment
The energy storage controller will not pollute the environment, and the constituent
materials and components of the product will meet the environmental protection
requirements. ATESS shall, according to environmental protection requirements, be
treated according to local regulations when the energy storage controller is used.
Appendix 8
8.1 Specification
8.2 Warranty
The warranty period of this product is one year. If the contract stipulates otherwise,
the contract shall prevail. During the warranty period, ATESS products shall
promptly present the invoice and date of purchase of the products to ATESS Service
personnel during maintenance. At the same time on the product the nameplate logo
should be clearly visible, otherwise it will not be repaired.
600/730/250mm
50kg
-25 °C... +55 °C
IP54
<20W
Forced-air
<65dB(A)@1m
Touch screen
RS485/CAN
To Next Page
Loading...
