26
Transport
Before each transport:
− switch off device
− Wait until the cutting device does not longer
move
Carry the product with the handle.
When transporting the product within a car put it in the boot
or on a separate loading area. Secure the device against
tipping over, damages and fuel spillage
Storage
Keep unused machines in a dry and closed area out of the
reach of children. Do not store them close to a cooker, oven
or hot-water apparatus with permanent flame or other spark-
generating devices.
Allow the engine to cool down before storing the machine.
Store unused equipment in a dry, locked place out of the
reach of children.
Before a longer period of storage carry out the following to
extend the saw service life and ensure an easy operating:
Ö thoroughly clean the device
Ö treat all movable parts with an environmentally friendly oil
L Never use any grease!
Ö Empty the fuel tank completely.
C Dispose of remaining fuel in an environmentally
compatible manner.
Ö Operate the engine until the carburettor is empty.
Ö Change the oil.
Ö Check the machine for perfect condition to ensure a safe
use of it after a longer period of storage.
Guarantee
Please observe the enclosed terms of guarantee.
Technical Data
Type/Model BF 43
Year of construction See last page
Max. engine performance 1.25 kW / 1.63 PS
Engine displacement 43 cm³
Engine speed at idling n
0
2800 ± 200 min
–1
Engine speed at recommended max. spindle rotational frequency Brush cutter: 8500 min
–1
/ Grass trimmer: 7800 min
–1
Max. cutting tool speed Brush cutter: 6500 min
–1
/ Grass trimmer: 6000 min
–1
Cutting diameter with thread spool Ø 440 mm
Thread diameter Ø 2 mm
Cutting diameter with cutting blade Ø 255 mm
Blade thickness 1,6 mm
Ignition system Electronic ignition
Spark plug TORCH L8RTC
Fuel tank-volume 1,2 l
Ratio of mixture (fuel/two stroke oil) 40:1
Spark gap 0,6 – 0,7 mm
Sound pressure level L
P
To Next Page
Loading...
