Atlantic Technology System 6200 - Technical Specifications; Amplifier Specifications Details; Subwoofer Specifications Details

18
8200/6200 Pedestal Subwoofer System
Speci cations
AMPLIFIER
RMS Power
(before limiting and servo)
350 Watts/Channel
Dynamic IHF Peak Power
550 Watts/Channel
Signal to Noise Ratio
(-90dB hum)
-97dB @ full output
Total Harmonic Distortion
0.05% @ full output
Frequency Response
(typical, in room)
SA-8200 = 15-400 Hz ±2 dB
SA-6200 = 25-400 Hz ±3 dB
Low Level Input Sensitivity
250mv @ full output, 100Hz
Low Level Input Impedance
22K
Ω
High Level Input Sensitivity
2.5v @ full output, 100Hz
High Level Input Impedance
820
Ω
Power Supply Storage
27K microfarads/channel
Toroid Transformer(s)
400VA/Channel
Output Stage Peak Current
40 amps rated/Channel
Dimensions
W x H x D (in/cm)
19.0/30.5 (faceplate);
16.875/42.86 (enclosure) x 5.0/12.7 (feet and faceplate) x 14.0/35.56
Weight
(lbs/kg)
SA-6200 = 22.3/10.12
SA-8200 = 38.9/17.64
SUBWOOFER
Driver Type
One (1) Glass bead/ceramic/carbon  ber/polymer cone per pedestal
Driver Size
8200 PED = 12"
6200 PED = 10"
SPL
(approx. peak output, typical, in room)
8200 PED 1 pair/2 pair (THX Ultra 2) = 117dB/120dB
6200 PED 1 pair = 115dB
Dimensions
W x H x D (in/cm)
8200 PED = 9.3/23.3 x 29.6/78.8 x 15.6/38.7
6200 PED = 7.8/19.4 x 26.0/66.0 x 14.3/35.6
Weight
(lbs/kg)
8200 PED = 52.0/23.6
6200 PED = 37.0/16.8
Speci cations
Speci cations