Atlantic F617 - Disposal and Environmental Guidelines; Altitude Installation Effects; Installation and Servicing; Installation Preparation and Rules

21
Warning: To prevent overheating, and for safety reasons,
do not cover the heating appliance.
Appliances carrying this symbol must not be disposed of
with household waste. They must be collected separately
and recycled.
Products at the end of their life must be collected and
recycled in accordance with the local provisions and
decrees.
Installing a vertical appliance at altitude causes an increase
in the air outlet temperature (10 °C per 1000 m change in
altitude).
Installation and Servicing
PREPARING TO INSTALL THE APPLIANCE
Installation rules
- This appliance has been designed for installation in a residential
setting. Please consult your retailer for any other scenario.
- Installation must be carried out in accordance with good industry
practice, and with the standards in force in the country of
installation (NFC 15-100 for France).
- The appliance must be connected to a 230 V / 50 Hz single-phase
power supply.
- In wet environments such as bathrooms and kitchens, the
connection box must be installed at least 25 cm from the floor.
3m
2,25m
Area 2
Area 1
0,6m
0,6m
0,6m
Area 1
No electrical appliance
Area 2
IPX4 electrical appliance
(Standard EN 60335-2-
43: 2003/A2: 2008)
50
50
12
15
15
Dimensions in cm
Maintain the minimum distances
from furniture when positioning
the appliance.
Do not install shelves above
vertical appliances.