Why Atlantic F620 Heater is not heating up?
If your Atlantic Heater isn't heating, and you're using programming, ensure you're in a Comfort time slot. Also, check that the installation’s circuit breakers are engaged and that the load-shedding device (if present) hasn't stopped the appliance from functioning. Finally, check the ambient temperature of the room; if it's higher than the set temperature, the appliance won't heat up.
What to do if Atlantic F620 Heater does not heat enough?
If your Atlantic Heater isn't heating enough, first, increase the temperature setting. If the room still doesn't reach the desired temperature, check the temperature at the bottom right of the appliance. If this temperature is above the set temperature, the appliance should not be heating. If there's a significant difference between the temperature at the bottom right of the appliance and the ambient room temperature, adjust the appliance's surroundings. Also, make sure the heater's power is adequate for the room size and structure, and that the area being heated is enclosed.
Why is my Atlantic F620 heating all the time?
If your Atlantic Heater is heating constantly, check the temperature at the bottom right of the appliance. If this temperature is below the set temperature, the appliance should be heating. If there's a large difference between this temperature and the room's ambient temperature, adjust the surroundings accordingly. Ensure the heater's power matches the room's dimensions and structure, and that the area is enclosed. If a problem persists (like a locked thermostat), cut the power to the appliance (fuse, circuit breaker) for about 10 minutes, then switch it back on.
How to fix Atlantic Heater control panel if it does not light up?
If the control panel of your Atlantic Heater doesn't light up, press any button to activate the display. Check that the appliance is powered on and that the switch is in position I.
What to do if Atlantic F620 heating indicator does not light up?
If the heating indicator on your Atlantic Heater isn't lighting up, first, check that the indicator light is active. Consult the 'Heating standby indicator'. Also, check the ambient and set temperatures.
Why is the room temperature different from the Atlantic F620 display?
If the room temperature differs from what your Atlantic Heater displays, allow at least 6 hours for the temperature to stabilize. You can then adjust the setpoint temperature to match the actual room temperature. See 'Calibration'.
Why is the surface of my Atlantic F620 very hot?
If the surface of your Atlantic Heater is very hot, check the ambient temperature of the room. If it's higher than the set temperature, refer to the section 'The appliance is heating constantly'. Otherwise, the appliance's heating output is right for its power and the dimensions of the room.
Why Atlantic F620 Heater does not follow the internal programming commands?
If your Atlantic Heater isn't following internal programming commands, check that the date and time are correctly set. Also, ensure that the appliance is in Programming mode.
Why do traces of dirt appear on the wall around Atlantic F620?
If you notice dirt on the wall around your Atlantic Heater, the cause may be poor ambient air quality (from cigarette smoke, candles, incense, or a fireplace). Ensure the room is properly ventilated with adequate ventilation and air intake.
General| Color | White |
|---|---|
| Frequency | 50 Hz |
| Power | 2000W |
| Mounting | Wall-mounted or freestanding |
| Voltage | 230V |
| Safety Features | Overheating protection |
| Heating Area | 20 m² |
To Next Page