• Pumping hydrocarbon oxides.
• Pumping oxidants.
• Pumping gases that tend to self-decompose, or that are chemically unstable.
• Pumping gases that contain particles larger than 23μm or more than 0.1% by weight
• Use with oxygen enriched atmospheres.
• Use of the pump with mineral oil as the seals flush liquid.
• Use of the pump with a sealing liquid or seals flush liquid which does not comply with the
requirements of Section 2.6.
• Pumping of, or use of, the pump in the presence of explosive atmospheres.
• Use of the pump in ambient conditions other than those specified in Section 2.
1.3 Applications
The pumps are suitable for use in distillation, filtration, evaporation, drying, stripping and deaeration
processes in a wide range of industries and applications.
You must ensure that the pump is suitable for your application.
If you have any doubts as to the suitability of the pump for your application, consult Atlas Copco
Applications Engineers for advice.
To Next Page
Loading...
