D 4.6 8
D_4.6_01_GB.fm 8-38
1.2 Preparations for paving
Separating agent
Spray the parts coming into contact with
asphalt (hopper, screed, auger, push
roller) with a separator emulsion.
m
Do not use diesel fuel as it dissolves the
bitumen (prohibited in Germany!).
Screed heater
Switch on the screed heater ca. 15–30 minutes (depending on the ambient tempera-
ture) before paving begins. Warming up prevents the material from sticking to the
screed plates.
Direction marks
To ensure straight paving, a direction
mark must be present or established
(road edge, chalk lines or similar).
- Slide the operating panel to the de-
sired side and secure it.
- Pull the direction indicator out of the
bumper (arrow) and adjust it accord-
ingly.
F0147_A1.TIF
Stossstange.bmp
To Next Page
Loading...