F 11.0 8
F_11.0_01_GB.fm 8-8
2 Instructions to change from mineral oil to synthetic oil / from synthetic oil to
mineral oil
2.1 Caterpillar drive - planetary gear
m
Mixing synthetic oils with mineral oils is strictly forbidden!
- Completely drain the used oil.
A
Change the oil when the engine is at op-
erating temperature.
- Rinse the subunit with the new type of
oil.
- For rinsing run the caterpillar drive
for 10 minutes.
- Fill in the oil type to be used according
to the applicable maintenance instruc-
tions.
To Next Page
Loading...