2.5 Regulating system
G 2 up to G 4
The main components of the regulating system are:
• Blow-off valve (Y1)
• The Elektronikon™ Base controller that starts/stops the compressor based on the pressure
settings and readings of the pressure sensor.
As long as the working pressure is below the preset maximum, the compressor will run fully
loaded (100% output) and the blow-off valve will be closed. When the working pressure reaches
the maximum limit, the Base controller stops the main motor and opens the blow-off valve. The
Instruction book
20 2920 7199 10
To Next Page
Loading...
