Emergency stop
When the emergency push button is restored, reset the alarm by pressing the enter button (7) for
5 seconds. The following screen will appear:
Alarm reset
3.6 Shutdown warning
Description
A shutdown warning will appear in the event of:
• A too high temperature at the outlet of the compressor element.
Compressor element outlet temperature
• If the outlet temperature of the compressor element exceeds the shutdown warning level
(factory set at 110˚C/ 230˚F), warning LED (5) is on.
• Press Scroll up or down buttons (4-8). The screen shows the temperature at the compressor
element outlet.
Instruction book
30 2920 7119 21
To Next Page
Loading...
