Example of error sensor
Motor overload
In the event of motor overload:
• The compressor will stop.
• Alarm LED (5) will flash.
• The following screen will appear:
Main screen with shutdown indication, motor overload
• Contact your supplier for fault troubleshooting
• When the shutdown condition has been solved, press the enter button (7) for 5 seconds.
• When <rSt> appears on the display, the compressor can be restarted.
Incorrect phase sequence
In the event of wrong phase sequence:
• The compressor will not start.
• Alarm LED (5) will flash.
• The following screen will appear:
Instruction book
2920 7119 21 33
To Next Page
Loading...
