2920 1381 02
29
Instruction book
Service kit for oil separator Ordering number
For all GA 2901 0432 00
Roto-inject fluid
Atlas Copco Roto-injectfluid (see section 4.3.1) can be ordered
in following quantities:
Quantity Ordering number
20-litre can 2901 0522 00
209-litre drum 2901 0045 01
Motor grease
For ABB motors, the ordering number for a motor grease
cartridge is 2901 0338 01 (see section 4.1).
Footnotes chapter 4
1) Use only authorized parts. Any damage or malfunction by the
use of unauthorized parts is not covered by Warranty or Product
Liability.
2) Whichever interval comes first. The local Atlas Copco Sales
Company may overrule this schedule depending on the working
conditions of the compressor.
3) Every 3,400 operating hours for GA75 60 Hz.
4) Using key <<Rset>> in submenu <<Service>>: see User manual
for Elektronikon regulator, section “Service submenu”.
1 Oil separator kit
2 Condensate trap kit
3 Filter kit
4 Minimum pressure valve kit
5 Check valve kit
6 By-pass valve kit
7 Oil stop valve kit
8 Unloading valve kit
Fig. 4.1 Preventive maintenance kits (typical examples)
132
8456
F105
7
To Next Page
Loading...
Need help?
General
