Atlas Copco LP 13-30 P User Manual

Main parts
LP 13-30 P
A. Filler cap, fuel
B. Filler cap, hydraulic oil
C. Sight glass, hydraulic oil level
D. Filter condition gauge
E. Hydraulic oil filter
F. Engine oil, dipstick
G. Ignition switch OFF and ON
H. Fuel tap
I. Oil cooler
J. Hydraulic pump
K. Choke control
L. Recoil start
M. Pressure relief valve
N. Foldable handles
O. By-pass valve
P. Air filter
Q. Drain plug
R. POD system
S. Lifting point
Labels
The machine is fitted with labels containing
important information about personal safety and
machine maintenance. The labels must be in such
condition that they are easy to read. New labels
can be ordered from the spare parts list.
Data plate
C
A
B
G
F
D
E
H
xxxxx
Construction Tools EOOD
A. Maximum permitted hydraulic oil flow
B. Machine type
C. Maximum relief valve setting
D. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
E. Serial number (is also stamped in the valve
housing).
F. The CE symbol means that the machine is EC-
approved. See the EC declaration which is
Safety and operating instructions LP 13-30 P
10 © Construction Tools EOOD | 3392 5254 01 | 2017-04-13
Original instructions

Atlas Copco LP 13-30 P Specifications

General

Brand	Atlas Copco
Model	LP 13-30 P
Category	Power Pack
Language	English