Atlas Copco LP 13-30 P User Manual

delivered with the machine for more
information.
G. Year of manufacture.
H. Maximum nominal operating pressure
Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
EHTMA
The European Hydraulic Tool Manufacturers
Association (EHTMA) has categorised hydraulic
power packs and tools in terms of flow rate and
working pressure.
LP 13-30 P
Flow rate 20-30 l.p.m. (5-8 US gal/min)
Nominal pressure 125 bar (1,812 psi)
Max pressure 150 bar (2,175 psi)
EHTMA category C and D
EHTMA category
The machine is clearly marked with EHTMA
categories. It is important that any power source
used is in a compatible category. If any doubt,
consult an authorised supervisor.
Safety label
Fuel label
Lifting point label
Installation
WARNING Whipping hydraulic hose
Hydraulic hoses under pressure can whip
uncontrollably if screws loosen or are loosened. A
whipping hydraulic hose can cause severe injuries.
►
Depressurise the hydraulic system before
loosening the connection of a hydraulic hose.
►
Tighten the nuts on the connections of the
hydraulic hoses to the required torque.
►
Check that the hydraulic hose and the
connections are not damaged.
Quick-release couplings
The original hydraulic hoses are fitted with Flat-
Face quick-release couplings that are strong and
easy to clean. The quick-release couplings are
fitted so that the male connection supplies oil and
the female connection receives oil.
NOTICE Wipe all couplings clean before
connecting. Ensure that couplings are clean and
correctly engaged before operation. Failure to do
so may result in damage to the quick couplings
and cause overheating and cause foreign matter to
enter the hydraulic system.
LP 13-30 P Safety and operating instructions
© Construction Tools EOOD | 3392 5254 01 | 2017-04-13
Original instructions
11

Atlas Copco LP 13-30 P Specifications

General

Brand	Atlas Copco
Model	LP 13-30 P
Category	Power Pack
Language	English