Atlas Copco MT Focus 400 - Controller System Information

Troubleshooting EN MT Focus 400
24
© Atlas Copco Industrial Technique AB - 9836 6294 01
Controller system information
To view the information:
1. Press either the UP or the DOWN button.
2. Select System information in the menu.
3. Press OK.
4. Scroll through the information, using the UP and DOWN buttons.
■
Model: The controller model.
■
S/W ver: The controller software version.
■
Bootloader ver.: The bootloader software version.
■
System S/N: The controller serial number.
■
Chip S/N: The controller usb-chip serial number.
■
Tool S/N: The tool serial number.
■
Tool type: The tool type.
■
Tool temp: The current temperature in the tool.
■
Tool A/D: The sampled current value from the tool A/D converter.
■
Tool S/W: The tool software version.
■
Friction: The internal friction in the tool.
■
No. tightenings: The total number of tool cycles, including unscrew and Not OK tightenings.
■
Supply Voltage: The controller supply voltage.
5. Press OK when done.