EasyManua.ls Logo

Atlas Copco Pionjar 120

Atlas Copco Pionjar 120
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Pionjär 120/120AV 130/130AV
© 2005 Atlas Copco Construction Tools AB
|
No 9800 0438 51
|
2005-10-31
Safety and operating instructions
Technical Data
Technical data Pionjär 120 Pionjär 120AV Pionjär 130 Pionjär 130AV
Application Combined rock drill and breaker Breaker
Weight 27 kg 28 kg 25 kg 26 kg
Length 730 mm 760 mm 700 mm 730 mm
Width 330 mm 390 mm 330 mm 390 mm
Engine
Type single cylinder, two stroke, air cooled
Cylinder displacement 185 cc
Crankshaft speed 2550–2650 rev/min (blows/min) (loaded machine on concrete chisel)
Carburettor floatless, with manual needle valve
Ignition system Thyristor type, breakerless
Spark plug (recommended) Motorcraft AE-6, Bosch W7AC
Spark plug gap 1.5 mm
Starter Magnapull
Fuel type Petrol, 90–100 octane, leaded or unleaded
Oil type Atlas Copco two-stroke oil or a recommended two-stroke oil
Fuel mixture Cast iron cylinder 8%, 1:12
Tank volume 1.1 l
Fuel comsumption 1.3–1.5 l/h
Drilling capacities for Pionjär 120/120AV
Max. drilling depth 6 m
Penetration rate 300–350 mm/min with 29 mm bit
250–300 mm/min with 34 mm bit
150–200 mm/min with 40 mm bit
Drill rotation speed 250 r/min
Noise & Vibration Declaration Statement
Pionjär 120/120 AV Pionjär 130/130AV
Noise according to ISO 3744
Sound pressure level dB(A)
in accordance with ISO/DIS 11201
L
p
PHDVXUHGU PG%$UHOȝ3D 104 104
Vibration according to EN 28662
Measured vibration value, a m/s
2
20 19
Spread in methods and production, ka m/s
2
5.0 5.0
These declared values were obtained by laboratory type testing in compliance with the stated standards and are not
adequate for use in risk assessments. Values measured in individual work places may be higher than the declared
values. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon
the way the user works, the work piece and the workstation design, as well as upon the exposure time and the physical
condition of the user.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no
control.
Crowder Supply Co., Inc. • 8495 Roslyn St., Commerce City, CO 80022 • Toll Free: 888-883-5144 • www.CrowderSupply.com
www.CrowderSupply.com • Toll Free: 888-883-5144

Table of Contents

Other manuals for Atlas Copco Pionjar 120

Related product manuals