EasyManua.ls Logo

Atlas Copco SmartROC T45

Atlas Copco SmartROC T45
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SmartROC T45/C50 4 Safety Precautions
16
4.3 SafetyDuringLifting,InstallingandConnecting
Makesurethefollowingconditionsaremetwhilelifting,installing,andconnectingthema
chineoritsequipment:
n Makesureonlyauthorizedpersonnellifts,installs,andconnectstheequipment.
n Donotliftheavycomponentsbyhand.
n Useonlyapprovedtoolsandmethods.
n Useliftingdevicesthatareinspectedandapproved,andareincompliancewithlocal
regulations.
n Attachliftingdevicesonlytospecifiedliftingpoints.
n Makesurenopersonnelispresentundersuspendedloads.
n Useonlyladdersandplatformsdesignedforthethatspecificpurpose.
4.4 SafetyPrecautionsDuringTramming
n Followlocaltrafficregulations.
n Observethatnopersonnelispresentwithinthemachinehazardzoneorinthedirec
tionoftravel.
n Beawarethatimpairedvisibilitycancauseacollisionriskfortheoperatorandforother
machines.
n Alwayscheckthegroundconditionswherethemachinewillbeoperated.
n Adaptthespeedtotheterrain.
n Neverexceedthemaximumallowedinclinationanglesforthemachine.
n Makesurethattheboomsystemissettothecorrecttrammingposition.
4.5 SafetyPrecautionsDuringOperation
n Checkthatpedalsandcontrolscanbeeasilyaccessedbytheoperator,priortostart
ingthemachine.Ifthecontrolsarenotaccessibletotheoperator,themachinemust
notbeoperated.
n Makesurethatallwarningsignalsonthemachinearetestedbytheoperatorbefore
startingthemachine(forexamplebreaklightsandturnsignal).
n Closealldoorsduringoperationtonotdisrupttheflowofcoolingairorreducenoise
suppression.Adoormaybekeptopenforashortperiodoftime,onlyifnecessary.
n Turntherotationoffwhenmanuallyhandlingdrillbitsanddrillsteel.
n Activatethemachine'sfunctionalityofcollectingdust(waterflushing,watermist,or
dustcollector)duringdrilling.Rockdustiscreatedduringthedrillingprocessandis
harmfultoone'shealth.
n Stayclearfromtheexhaustcleaningunitandtheexhaustpipesonexhaustopenings.
Hightemperaturegasesescapefromtheunit.
n Switchoffthedieselenginepriortorefuelling.Donothandleflammableliquidsnear
hotsurfaces,sparks,oranakedflame.
4.6 SafetyPrecautionsDuringServiceandMaintenance
n Turnoffthemachine.
n Switchoffthemainpowersupply.
n Switchoffthebatteryisolationswitchandsecureitwithasecuritypin.
n Performmaintenanceinaccordancewiththemaintenanceschedule.
n Priortoworkingonthemachine,ensurethatallpartsarecooleddown.
n Performserviceormaintenanceonlywhenthemachineisonfirmandlevelground.

Table of Contents

Related product manuals