Atlas Copco SmartROC T45

SmartROC T45/C50 5 Safety Functions
26
1.
Useahandheldfireextinguishertoextinguishthefire.Followthemanufacturer'sin
structions.
2.
Performthefollowingstepsonlyifpossible:
a.
Turnoffthemainpowerswitchandthebatteryisolationswitch,orwhicheveris
availableonthemachine.
b.
Closethefuelsupplyvalve,ifavailable.
!
NOTE:Donotrestartthemachineuntilthecauseoffirehas
beenestablishedandfaultshavebeencorrected.
3.
Replacetheusedfireextinguisherswithapprovednewfireextinguishers.
4.
Cleanoutanyfireextinguisherresidueinthemachinebeforeoperatingthemachine.
5.5 EmergencyExit
EmergencyExit
Ifthecabindoorisblockedduringandemergency,thehammerprovidedinthecabinis
usedtoshattertherearwindowandcreateanemergencyexit.