Atlas Copco SmartROC T45

SmartROC T45/C50 3 Risks and Hazards
9
3 RisksandHazards
3.1 StoredEnergyHazard
Personnelmusthaveknowledgeofthemovementofcomponents,howtheyarecontroled
bythehydraulicsystemandanyrelatedcontrolcircuits,priortooperatingthemachine.
n Preventmovementofanycomponentthatcouldcausepersonalinjuryandproperty
damage.
n Considersituationswherecomponentmovementcannotnotbeprevented.Forexam
ple,ifthehydraulicsystemfails,disengages,orreceivesacontrolsignalresultingin
componentmovement,makesurethatnopartofthebodyisinapositionwherecom
ponentmovementcancausephysicalinjury.
n Considersituationswherecomponentsorthemachinecanreacttothereleaseofpo
tentialenergy.Makesurethatallsourcesofpotentialenergyhavebeenreleasedand
thatthepossibilityofmovementhasbeenmechanicallyprevented.
3.2 BurnHazard
BurnHazard
Thehotsurfaceoftheparticlefilterandtheexhaustpipecancauseariskofbeingburned.
Tominimizerisk:
n Keepawayfromtheparticlefilterandtheexhaustpipeduringregeneration.