- 39 -
- Fuel pressure
This view shows the fuel pressure and the running
hours.
See also "Parameter list" on page 39 for selection
between metric (bar) or imperial (psi) units.
- Service Timer 1 & Service Timer 2
This view shows both Service Timers. The
Service Timer indication is shown when service
time has run out.
The Service Timer indications counts upwards
and gives an alarm when the set value is reached.
- LOG list
This view shows the alarm memory and gives
access to it.
- Xc2002 Event LOG #01
- Xc2002 Event LOG #02
This view shows the event log and the service
timer.
The event log will be stored upon shutdown or
service timer acknowledgement.
Emergency stop log will be stored separately
- Parameter list
This view shows a number of Parameter settings
and gives access to them.
The Parameter Menu's are pre-programmed!
A password will be requested for when an attempt
to change a setting is about to be done (user
password = 2003)
Menu's shown on the Parameter list LCD:
- Language
This view shows the language in use and with
scroll UP or DOWN a list of available languages
and gives access to them.
Icons is the default factory set language, however
6 other languages can be selected: English,
French, Spanish, German, Italian, Chinese and
Cyrillic (Russian). All information in the
Parameter List display is always in English.
To Next Page
Loading...
Need help?
General
