- 51 -
Maintenance schedule (running hrs)
(continuation of page 50)
Daily 50 hrs after initial
start-up
Every
500 hrs
Every
1000 hrs
Every
2000 hrs
Ye ar ly
Check engine oil level (if necessary top up) x
Check compressor oil level (if necessary top up) x
Check coolant level x
Check/Fill fuel level (3) x
Check control panel x
Check on abnormal noise x
Check electrical system cables for wear x
Check for leaks in engine-, compressor-, air-, oil-, or fuel system x x x x x
Check torque on critical bolt connections x x x x x
Check electrolyte level and terminals of battery x x x x x
Check engine (minimum and maximum) speed x x x x x
Replace compressor oil filter(s) (5) x x x x
Change engine oil (2) (10) xxxx
Replace engine oil filter (2) xxxx
Replace fuel (pre)filters (6) xxxx
Clean flow restrictor in oil scavenge line x x x x
Check/Test glow plugs - grid heater x x x x
Clean after cooler (option) (1) x x x x
Clean oil cooler(s) (1) xxxx
Clean radiator (1) xxxx
Clean charge air cooler (1) xxxx
Drain/Clean fuel tank water and sediments (1) x x x
Hoses and clamps - Inspect/Replace x x x
(to be continued on page 52)
To Next Page
Loading...
Need help?
General
