1. More frequently when operating in a dusty environment.
2. Refer to engine operation manual.
3. After a days work.
4. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
5. Use Atlas Copco oil filters, with by-pass valve as specified in the parts list.
6. Gummed or clogged filters means fuel starvation and reduced engine performance.
7. See section Oil specifications.
8. The following part numbers can be ordered from Atlas Copco to check on inhibitors and freezing
points:
• 2913 0028 00 refractometer
• 2913 0029 00 pH meter
9. See section Safety valve.
10. Replace all rubber flexibles every 6 years.
For other specific engine and alternator requirements refer to specific manuals.
11. Every 500 hours is only valid for EU, US and Canada, when using PAROIL E or PAROIL E xtra.
Other regions change engine oil every 250 hrs.
12 Every 5000 hrs.
Keep the bolts of the housing, the lifting
beam, tow bar and axles securely
tightened. For torque values see section
Technical specifications.
To Next Page
Loading...
Need help?
General
