• Push the Enter key, use the Scroll keys to select the setting to be modified and push the Enter key
again.
• A screen appears. Use the ↑ or ↓ key to select the required parameter and push the Enter key to
confirm.
Automatic restart
• Select the Automatic restart settings icon as described above and push the Enter key (2). Following
screen appears:
Text on figure
(1) Automatic restart
(2) Maximum power down time
(3) Restart delay
(4) Modify
• The screen displays 3 adjustable settings.
• Push the Enter key (1), scroll to the setting to be modified and push the Enter Key once again.
• A screen appears; the required parameter is adjustable and confirmed by pushing the Enter Key once
more.
Access key
A number of security levels are set in the controller (e.g. user, service technician, etc.). The Access key
menu item is used to change the security level.
• Scroll to the correct icon using the scroll key and push the Enter key.
• Push the Enter key twice to modify the security level code and push Enter to confirm.
User password
If the password option is enabled, it is impossible for unauthorized personnel to modify any setting.
• Using the Scroll keys, move the cursor to the Password icon.
• Push the Enter key twice to select and activate.
• Pick a 4 digit password using the Scroll keys and push the Enter key to confirm.
Instruction book
162 2920 1815 04
To Next Page
Loading...
