Atlas Copco ZR 110 User Manual

Tightening the tie rods on ZT compressors
Before initial start-up, the tie rods must be tightened. Proceed as follows:
• Check that all transport fixtures are removed
• Check that the compressor is pressureless
• Tighten the nuts of tie rods (1) by hand
• Tighten the check nuts
Water circuit of ZR compressors
Water drain plug, HP element of ZR 110 up to 275
Instruction book
242 2920 1815 04

Atlas Copco ZR 110 Specifications

General

Brand	Atlas Copco
Model	ZR 110
Category	Air Compressor
Language	English