Vessel for MD dryers on ZR/ZT 110 up to ZR/ZT 145
Instruction for use (vessel)
Reference Name
1 Cover
2 Bottom
3 Bolt
4 Washer
5 Nut
6 Housing
• This vessel can contain pressurized air; please be aware of its potential danger in case of misuse.
• This vessel shall only be used as an air dryer to a compressor and operated within the specified limits
as given on the data plate.
• Original bolts have to be used after opening for inspection. Specified torque has to be taken into
consideration.
• This vessel has been designed and built to guarantee an operational lifetime in excess of 20 years.
Therefore there is no intrinsic need for in-service inspection of the vessel when used within its design
limits and in its intended application. National legislation however may require in-service inspection.
Instruction book
2920 1815 04 317
To Next Page
Loading...
Need help?
General
