Need help?Do you have a question about the Atmor Thermo Pro2 Series and is the answer not in the manual?
General| Brand | Atmor |
|---|---|
| Model | Thermo Pro2 Series |
| Category | Water Heater |
| Language | English |
Crucial safety guidelines, definitions of alert symbols, and warnings for safe operation.
Details specific hazards, warnings, and notices to prevent injury or property damage.
Acknowledges terms of warranty and return policy upon installation.
Overview of the Atmor Electric Tankless Water Heater features and benefits.
Guidance on setting safe water temperatures to prevent scalding, especially for vulnerable users.
Guidelines for choosing a suitable location, avoiding hazards like freezing, humidity, and flammable materials.
Step-by-step instructions for securely mounting the unit in the correct orientation.
Adherence to plumbing codes, precautions, and information on pressure relief valves.
Details piping requirements, including pressure resistance and specific regional needs.
Detailed steps for plumbing installation, including critical warnings about air purging and leak detection.
Key specifications like flow rate, working pressure, and connection sizes.
Adherence to electrical codes (NEC/CEC) and crucial safety warnings for installation.
Detailed steps for connecting the unit to the circuit breaker and ground.
Chart showing maximum temperature rise achievable for different flow rates.
Explains how the tankless system works, its energy efficiency, and demand-based heating.
Table detailing acceptable levels for pH, TDS, hardness, and other water parameters.
Guidance on periodic inspections, cleaning, descaling, and purging air to prevent element damage.
Instructions for operating the control knob for power and setting the desired water temperature.
Steps for activating and setting the temperature for the first use.
Measures to take to prevent damage from freezing temperatures and warnings about frozen units.
Addresses issues like no hot water, insufficient heating, or display errors.
Solutions for water not being hot enough, low pressure, or excessive cold water mixing.
Resolves issues where water is too hot, flow is slow, or temperature varies unpredictably.
Addresses problems like the heater shutting off during use or water flow stopping.
Instructions on how to reset the unit, including critical safety warnings.
Information on warranty coverage, duration, service, and exclusions.
Explains how hard water can affect product performance and potentially void the warranty.
To Next Page
