12. Connecting boilers to the electrical power network
The boilers are connected to 230 V, 50 Hz mains with a mains cable without a plug. The mains
supply cable in case of repair it must be replaced with the same type by the servicing organization.
Connection, maintenance and reparation can be made only by a qualified person in accordance with
valid regulations of the particular country.
CAUTION - The mains cable must not be equipped with a plug (designed to be connected
to a socket). It must be connected in a fixed way to a switchboard or junction box to avoid
confusion of the conductors.
Mains cable must be regularly checked and maintained in the prescribed condition. It is forbidden
to interfere in to the safety circuits and elements for safe and reliable operation of the boiler. If any
damage of electrical equipment must be the boiler out of operation, disconnect from the mains and
ensure a qualified repair according to applicable standards and regulations.
Connectors in side hoods of the boiler:
1 - connector for income cabel (L - brown, N - blue, PE - green/yellow)
2 - connector for extraction fan
1 -
- 2
Connector in the left side hoodConnector in the right side hood
To Next Page
Loading...
