23. Laddomat 22
With its construction, Laddomat 22 replaces the
traditional connection composed of individual
parts. It is composed of a cast-iron body, ther-
moregulatory valve, pump, non-return flap valve,
ball valves and thermometers. When the water
temperature reaches 78 °C, the thermoregulato-
ry valve opens the water supply from the storage
tank. The connection with Laddomat 22 is consid-
erably easier and therefore, we recommend it. A
spare thermo-cartridge of 72 °C is supplied with
the Laddomat 22 device. It is used for boilers over
32 kW.
OPERATION DATA
Max. operating pressure
0,25 MPa
Design pressure
0,25 MPa
Test over pressure
0,33 MPa
Hoghest operating temperature
100 °C
WARNING - For boilers with an output from 15 up to 100 kW we recommend using Lad-
domat 22, which is factory fitted with thermo-cartridge of 78 °C.
24. Thermoregulatory valve
Thermoregulatory valve type, TV 60 °C
(65/70/75 °C) is used with solid fuel boilers. When
the boiler water temperature reaches + 60 °C , the
thermoregulatory valve opens and fluid from the
building heating circuit (2) enters the boiler circuit
( 3 →1). Inlets 1 and 3 always remain open. This
ensures that the minimum temperature of the wa-
ter returning to the boiler is maintained. If need
be, a thermoregulatory valve set to a higher tem-
perature (E.g. 72 °C) may be used.
Recommended sizes of the thermoregulatory valve TV 60 °C (65/70/75 °C).
For boilers: D15E, DC18S, DC20GS, DC22S, DC22SX DC25S, DC25GS, DC30SX .... DN 25
DC32S, DC32GS, DC40GS, DC40SE, DC40SX ........................................ DN 32
DC50S, DC50SE, DC70S, DC75SE ................................................ DN 40, DN 50
Èerpadlo WILO
Yonos Para - 7,5
Teplomìr
Teplomìr
Teplomìr
ball valve
ball valve
ball valve
non-return ap valve
thermometer
thermometer
thermometer
pumpe
thermoregulatory valve
(thermo-cartridge)
To Next Page
Loading...
