ATOMSTACK M100 - Part 7-2: Power Adapter Connection (Specific Models); Connection for Specific Models

Adapter for M100
module
The user's original laser engraving machine adapter is connected to the air pump; the DC24V adapter
equipped with the M100 module is connected to the control box. The control box can be compatible with
DC24V
Part 7-2: A5 M50; A5 M50 PRO; X7; X7 PRO; A10; A10 PRO; S10 PRO
The connection method of the power adapter of these models
DC
24V
DC
12V
User's original
engraving machine
adapter