Web interface (WBM) 190
Web interface (WBM)
You can configure a number of settings for your phone via the “Web
Based Management” (WBM). The information is transferred via a secure
HTTPS connection.
Access to the web based management must be activated by
the administrator.
Launching the web interface
For more information on the IP address, the web interface
address, and how to connect the phone to the network, refer
to the section "Displaying network information" à page 188.
1. To launch the interface, open a web browser and enter one of the
following addresses:
l
https://[IP address of the phone]
[IP address of the phone] is the IP address of the phone.
l
https://[Name of the phone]
[Name of the phone] that was assigned by the administrator.
2. You might receive a certificate notification from the browser. Follow
the instructions to download the certificate.
3. You will be prompted to configure a user password the first time
you call up the WBM interface. You must log in with this password
the next time you want to open the “User settings”.
Administrator settings
This area lets you configure settings for administering your phone and
the network environment. Access to the “Administrator settings” is pro-
tected by the admin password.
For further information, consult the administrator or refer to
the administration manual.
Logging into the user settings
The web interface homepage opens once you have entered and con-
firmed the phone's IP address.
To Next Page
Loading...
