Attero Tech unD6IO-BT - Device Specifications

unD6IO-BT
User Manual
 Attero Tech LLC 2019 Page 18 614-00033 Rev 01_e
Device Specifications
Audio Inputs
Input Types:
Stereo Bluetooth® v3.0 audio
receiver
Stereo Unbalanced Inputs on
RCA (Inputs 3/4 A)
Stereo Unbalanced Inputs on
3.5mm TRS (Inputs 3/4 B)
Bluetooth
Range
10m (30ft) minimum
Input
Switching:
Software selectable line level
input source on In 3 and In 4
• RCA L/R
• 3.5mm L/R
• RCA + 3.5mm L (3)
and
RCA + 3.5mm R (4)
Input
Impedance:
>10k Ohms (Input 3/4 A & B)
Maximum
Input Levels:
+12 dBu (Input 3/4 A & B)
Phantom
Power:
+48V, software selectable
(Inputs 1/2 only)
Audio Input Performance
THD+N:
< 0.1% Bluetooth® Input @ -
3dBFS
<0.01% Line Inputs ¾ @
-3dBFS
Frequency
Response
20Hz – 20kHz, +/- 3dB
(Bluetooth® Input)
20Hz – 20kHz, +/- 1dB
(Inputs 3/4 A & B)
Dynamic
Range:
>95 dB (Inputs 3/4 A & B)
Product Compliance
FCC CFR 47 Parts 15B Class A
ICES-003
CE (EN55022)
RoHS
REACH
Bluetooth® Profiles
A2DP Media Audio Bridging
(100-150ms latency)
HFP Hands-Free Call Bridging
(30ms latency)
AVRCP A/V Remote Control
Audio Outputs
Output Type: Stereo Bluetooth® v3.0 audio
transmitter
Two unbalanced line level outputs
on stereo 3.5mm TRS
Attenuation Range: Software controlled volume
(0 to -60dB, 1dB increments)
Output Impedance: 100 Ohms (unbalanced)
Maximum Output
Levels:
+12 dBu at 0dB attenuation
(Output 1/2 A)
Audio Output Performance
Dynamic Range: >80 dB
THD+N:
<0.01% @ 1kHz, input signal 3dB
below maximum
Frequency Response
20Hz – 20kHz, +/- 1dB
(Outputs 1/2 A & B)
Environmental Conditions
Temperature: 0 – 40° C
Dante™/AES67 Network
Physical Level: Standard Ethernet
Connector: Single RJ-45
Cable Quality: CAT-5e or better
Transmission Speed: 100 Mbps
Supported Sample
Rates
44.1kHz
48kHz
Minimum Dante™
Network Latency
1ms
Power Requirements
PoE 802.3af PoE PD compliant
Power Consumption 5.5W Max
Cable Quality: CAT-5e or better
Physical Dimensions
Width 3.54"
Height 4.2"
Depth 2"
Weight 0.8 lbs.