Attero Tech unD6IO-BT - Page 53

Introduction
The USB Extender Plus Series extends and switches USB signals
from peripheral devices to a host computer up to 1,980 feet
(600meters) through a Gigabit Ethernet network or up to 330feet
(100meters) point-to-point over one CATx cable. It supports
USB2.0/1.0 devices with data rates up to 480 Mbps and it is
compatible with USB 3.0 devices that can operate at USB 2.0 data
rates. The transmitter includes USB peripheral emulation to enable
booting a host computer that is not connected to a keyboard or
mouse. To simplify device integration, the receiver features a built-in,
active four-port hub. The controller provides simple setup and control
for creating a distributed USB matrix switching system over a Gigabit
Ethernet network. Available in various form factors, the USB Extender
Plus Series supports USB peripherals such as keyboards, mice,
mass storage devices, and webcams in pro AV environments.
The USB Extender Plus Series is capable of transmitting USB signals
long distances over a CATx twisted pair infrastructure. For distances
up to 330 feet (100 meters), installation of the USB Extender Plus
enables direct connection of USB peripherals to the remote host
computer without needing additional IP network drops, equipment,
software, or drivers.
Where longer distances are required or when pairing one transmitter
to multiple receivers, the USB Extender Plus Series transmitter and
receiver can be connected to a Gigabit Ethernet switch located up to
330feet (100meters) away to extend the total distance to 660feet
(200meters). The signal can be extended through a network of up
to five Gigabit Ethernet switches, for a total transmission distance of
1,980 feet (600 meters).
Transmitters and receivers are available in three form factors that
can be mixed and matched for optimum integration flexibility. The
compact, 1-inch quarter rack width metal enclosure is designed for
desktop, under desk, lectern, or rack mounting. The USB Extender
Plus AAP model provides convenient and elegant architectural USB
connectivity. The USB Extender PlusD is a decorator-style wallplate
that fits into a single-gang wall box.
The USB Plus Matrix Controller provides a simple management
interface to create USB switching systems using up to 64 USB
Extender Plus Series transmitters and receivers. Any AV control
processor can easily control USB switching using SIS commands
sent via Ethernet or RS-232. The system can be configured quickly
and easily using Extron's Product Configuration Software - PCS.
Extends USB peripherals up to 1,980 feet
(600 meters) through a Gigabit Ethernet
network
Extends USB peripherals over one CATx cable
point-to-point up to 330 feet (100 meters)
Supports USB 2.0/1.0 devices with data rates up
to 480 Mbps. Compatible with USB 3.0 devices
that can operate at USB 2.0 data rates
Enables bulk, control, interrupt, and isochronous transfers as defined
by the USB specification.
Receiver features an integrated four-port hub
with 5 Volts, 500 mA available on each port
Allows simultaneous connection to multiple peripheral devices such
as the Extron Annotator 300, mass storage devices, keyboards,
mice, or other HID – Human Interface Devices.
One transmitter can connect to four receivers
Using a Gigabit Ethernet switch, one transmitter can support up to
four receivers via an IP network.
Peripheral emulation
Offers increased system reliability by emulating a connection
between the host and an HID-compliant keyboard and mouse.
Real-time status LED indicators for
troubleshooting and monitoring
Provides visual confirmation of port activity between an active host
and each connected peripheral device.
Choice of rack-mountable and architectural
form factors
Available in a compact, 1-inch rack-mountable metal enclosure, an
AAP - Architectural Adapter Plate, and a single-gang decorator-style
wallplate for easy integration into a variety of environments.
USB switching
controller lets you
easily create USB
switching systems
One controller can manage
a switcher configuration
of up to 64 USB Extender
Plus Series transmitters
and receivers. Enables the
use of serial or IP commands for
integration into a control system.
Device class filtering on select models restricts
the range of device types to HID and smart card
readers - USB Extender Plus HID
Device class filtering prevents unauthorized downloading or
uploading of content via the USB port in secure environments. The
USB Extender Plus HID is configured at the factory, such that device
class filtering cannot be removed or altered in the field.
Highly reliable, energy-efficient external
universal power supply included, replacement
part #70-775-01
Provides worldwide power compatibility, with high demonstrated
reliability and low power consumption for reduced operating costs.
FEATURES