EasyManua.ls Logo

ATX ucrypt q2q - Page 12

ATX ucrypt q2q
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION SUMMARY
4-2 MDU Solutions
®
– UCrypt
®
QAM to QAM – Quick Start Guide
voltages from 115 VAC to 230 VAC. There is no need to congure the power supply to operate on any voltage in this range.
The power cord provided with the UCrypt device is a North American conguration with a NEMA 5-15 grounded plug for 115
VAC. If it is necessary to operate the UCrypt device on 230 VAC, the installer must obtain an IEC cord with a NEMA 6-15
grounded plug for use in North America.
CHAPTER 4: