Need help?Do you have a question about the ATX ucrypt q2q and is the answer not in the manual?
General safety precautions and warnings for operating the device.
Steps for installing and powering on the UCrypt device.
Instructions for inserting CableCARD modules into the UCrypt device.
Guidance on connecting network and signal cables to the UCrypt device.
How to access the UCrypt device's web-based management interface.
Procedure for modifying the UCrypt device's network IP address.
Process of pairing CableCARD modules with their host slots for security.
Choosing programs for decryption or passthrough after CableCARD validation.
Setting QAM output frequencies and constellation size.
Assigning selected programs to specific output QAM carriers.
Requirements for properly grounding the UCrypt device for safety.
To Next Page
General