Owner’s Guide 400-109-005-A
8
n Press the Up and Down buttons simultaneously for three seconds to enter
the setup menu.
o Press the Up or Down button to change the option.
p Press the Up and Down buttons simultaneously and briefly to advance to
the next parameter.
q When the last parameter is displayed, press the Up and Down buttons for
three seconds to save any changes and exit the menu.
NOTE:
If you do not press any button for 15 seconds,
the thermostat will automati-
cally save any changes you have made and will then
return to its normal display
.
Setup menu
Parameter Options
Display and
default setting
Minimum
setpoint
5°C - 30°C (41°F - 86°F)
NOTE: The minimum setpoint cannot be set higher than the
value set for the maximum setpoint.
Maximum
setpoint
5°C - 30°C (41°F - 86°F)
NOTE: The maximum setpoint cannot be set lower than the
value set for the minimum setpoint.
400-109-005-A (Calypso) ENG.fm Page 8 Monday, November 30, 2009 2:36 PM
To Next Page
Loading...
Need help?
General
