7. Operation mode switch:
By means of this switch, the operation mode of the amplifier can be selected between stereo mode
or bridge mode. For most standard applications the amplifier will be used in stereo mode whereby
this switch should be turned to the left position. When using in bridged mode, the power of both
channels will be merged with each other and this switch should be turned to the right position.
8. Ground lift switch:
By means of this switch, the ground of the amplifier can be detached to interrupt ground loops.
This can be useful when unwanted hum and buzz is caused by current flow along the cable shield
between different devices.
To Next Page
Loading...
Need help?
General
