Installing the LINO
Mounting bracket
Every LINO speaker comes delivered with two L-shaped brackets making it possible
to install the speaker at each location and focussing it into the desired direction. The
metal constructed L-brackets ensures a solid and secure mounting of the loudspeaker
to any possible surface or location.
The L-shaped brackets have to be fixed to the wall through
2 screws. The used fasteners are depending on the mounting
surface (brick, concrete, wood, ...) and should be chosen
accordingly.
Once the wall brackets are mounted to the installation position,
the speaker should get fixed to the brackets. This is done through
inserting both supplied bolts and tightening them. The slot shaped
holes allow vertical directional adjustments while horizontal
adjustments are possible through rotation.
To Next Page
Loading...
Need help?
Power
Frequency
