BLUETOOTH
audeeo Refresh
3
Quick Start Guide
3.3 Bluetooth Pairing - Method 1
Ensure the earphones are turned o, then touch and hold the
Multi-Function button (A) for 3 seconds to turn the earphones ON.
The earphones will enter Bluetooth pairing mode automatically and
emit a tone as the LED indicator light (B) will flash GREEN and
RED. Make sure your device has Bluetooth turned ON.
Ensure Bluetooth is enabled on your smartphone or music device.
Your device will start searching for wireless devices. The earphones
will appear as “audeeo Refresh” in the list of available Bluetooth
devices.
Select “audeeo Refresh” the LED lights will stop on the earphones
and will say "Connected" to indicate that is has been successfully
paired with your device.
BLUETOOTH
audeeo Refresh
1
2
3
1 2 3
3S
ITEM: AOREFR
To Next Page
Loading...
