Settings in the MMI
Applies to vehicles: with adaptive cruise control
The settings of the Audi braking guard are
performed in the MMI*.
Settings regarding the system and the early
warn ing can be adjusted to the respective user
and saved in the MM!*.
Switching the system on and off
~
Select: ICARlf unction button> Audi brak-
ing guard.
~
Select System On to switch the system on
or
Off to switch the system off.
Switching the early wa rning on and off
~
Select: ICARI > Audi braking guard.
~
Select Early warning On to switch the
acoustic and optical warning on or
Off to
switch the system
off.
(D Tips
When handing over the keys to another
person, the previous settings are adopted
if the Audi braking guard is act ivated
¢page 41.
Driver's information in the instrument
cluster display
Applies to vehicles: with adaptive cruise control
braking guard activated
This drive r's information appea rs when a
brake jolt has been carried out due to an acute
warning.
Braking guard off
This driver 's information appears when the
system has been deactivated via the MM!* .
Furt hermore the inf ormat ion appears each
time short ly after the beginning of the jour -
ney when the system is switched
off.
This driver's information also appears when
the system is not available due to a malfunc-
tion or if you switch the ESP/ ASR
off
¢ page 199. In t his state the system no lon -
ger warns of a pending collision.
Adaptive cruise control 113
To Next Page
Loading...
