EasyManua.ls Logo

Audi A4 2012 - Page 221

Audi A4 2012
310 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Trim strips
Metal trim needs special care.
For environmenta l reasons, Audi fabricates
the bright trim strips and trim pieces from
pure chromium-free aluminum.
Dirt and marks on the trim strips should be
removed with a
pH-balanced cleaning agent
(do not use a chrome cleaner). Authorized Au-
di dealers carry clean ing products which have
been tested for use on your vehicle and are
not harmful to the environment .
To avoid corros ion on the exterior trim str ips,
only a pH-balanced solution should be used
for the windshield washer .
A WARNING
Always read and heed all WARNINGS and
other information ¢
page 216.
Plastic and vinyl
Plastic needs special care.
Use a clean, damp cloth or sponge to remove
dust and light surface dirt. For other soil, use
a lukewarm all-purpose clean ing solution or a
mild saddle soap for vinyl trim. Remove water
spots and traces of soap with a clean, damp
clot h or sponge. Use a clean, soft clot h to rub
dry.
Grease, tar or oil stains can be removed with a
clean cloth or sponge soaked with all-purpose
cleane r or with a solvent des igned especially
to clean vinyl.
Occasionally apply a colorless vinyl or leather
preservat ive to reta in the material's luste r
and pliability.
A WARNING
Always read and heed all WARNINGS and
other information ¢
page 216.
Aluminum trim
.
Use only neutral-pH products to remove spots
and deposits from alumin um surfaces.
Cleaning a n d protec t ion 219
Chrome care products and alkaline cleaners
will attack aluminum surfaces and can dam-
age them over t ime.
A WARNING
Always read and heed all WARNINGS and
other information
¢page 216 .
Touch-up paint
Minor paint damages should be touched up
immediately.
.. Use either a touch-up paint stick or spray
paint to cover minor scratches and nicks.
Your aut horized Audi dea ler has touch -up
paint for minor scratches and stone chips.
Scratches should be touched up soon after
they occur to prevent corrosion.
If a spot starts to rust, however, a simple
touch -up job will not be eno ugh. The affected
surface must be sanded smooth and coated
with an anti-rust primer before the painted
finish can be restored.
The number for the original vehicle paint can
be found on the vehicle identification label
¢ page 285 .
A WARNING
Always read and heed all WARNINGS and
other information¢
page 216.
Windows
Clear vision to all sides.
Clean all windows regularly t o remove road
film and car wash wax buildup.
.. Remove snow from windows using a brush.
.. Use a plast ic ice scraper to remove ice from
windows and mirrors .
.. Remove other residue on the windows with
a spray-on glass cleaner .
.. Wipe the windows dry with a clean piece of
cloth or kitchen paper towel.

Table of Contents

Related product manuals