- The driver is responsible for maintaining
the correct tire pressures. You must
check the tire pressures regularly.
- Under certain conditions (such as a spor-
ty driving style, winter conditions or un-
paved roads), the pressure monitor indi-
cator may be delayed.
- Ask your authorized Audi dealer if run-
flat tires may be used on your vehicle.
Your vehicle registration becomes invalid
if you use these tires when not permit-
ted. Damage to your vehicle or accidents
could also result.
- The tire pressure monitoring system
stops working when there is an ESP/ABS
malfunction.
- Using snow chains may result in a system
malfunction.
- To ensure a proper TPMS function use
AUDI Original Tires which are marked
with "AO" or "RO" on the tire sidewall.
¢page 258.
- The tire pressure monitoring system on
your Audi was calibrated using tires with
the "AO" or "RO" identification. We rec-
ommend using these tires.
Reset tire pressure monitoring system
Applies to vehicles: with tire pressure monitoring syst em
If the tire pressure is adjusted, wheels are ro-
tated or changed, the TPMS must be reset via
radio or
MM!* .
.,. Turn on the ignition .
.,. Select: the
ICAR I function button > Tire
pressure monitoring
> Store now.
(D Tips
Before resetting the TPMS, the current
pressures of all four tires must correspond
to the specified values. Adjust the tire
pressure and reset the pressure in the tire
pressure monitoring system according to
the load you are carrying
¢page 251.
Tires and wheels 267
•
•
To Next Page
Loading...
