Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Note:
If the outer B-pillar has already been removed, unfasten welded seam -a- at inner B-pillar.
– Inner side member, welded seam.
– Detach part. If necessary, bend open outer B-pillar.
Note:
Partial repair is also possible using the separating cuts shown. Butt weld SG continuous seam in separation
area.
Audi A8 1994 ➤
Body repairs - Edition 10.1998
6. Outer side member - Renewal 57
To Next Page
Loading...
