Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove small punch rivets. Use rechargeable riveter -VAS
5279A- with attachments S1 and D2 from -VAS 5279/2 - or
rechargeable riveter -VAS 5279B- with attachments S1 and
D2 .
– Detach part.
Replacement part
♦ Wing mounting strip
Preparing new parts
– Match up new parts.
– Prepare flanges on body and new parts for welding.
– Fix new part in position with alignment bracket.
Welding in
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
1. Wing mounting flange - Renewal 37
To Next Page
Loading...
