Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
50 – Body - front
RO: 50 72 55 00
1 Wing mounting flange - Renewal
WARNING
Always observe safety precautions.
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes .
1.1 Tools
Special tools and workshop equipment required
♦ Compact angle grinder -VAS 5167-
♦ Shielded arc welding equipment 250A
♦ Rechargeable riveter -VAS 5279A-
1.2 Procedure
Cutting locations
WARNING
Take care not to damage node castings and extruded sections
when cutting.
– Separate weld seams using compact angle grinder -VAS
5167- .
– Separate original joint with rechargeable riveter -VAS 5279A- .
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
36 Rep. gr.50 - Body - front
To Next Page
Loading...
