Audi A8 - Outer Side Member - Renewal; Tools

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
RO: 51 45 55 00
6 Outer side member - Renewal
WARNING
Always observe safety precautions.
1 - Outer side member
2 - Separating cut in B-pillar
3 - Separating cut in A-pillar
4 - Separating cut in side mem‐
ber (front)
Partial renewal
Partial renewal is possible with
this separating cut.
5 - Separating cut in side mem‐
ber
Partial renewal
Partial renewal is possible with
this separating cut.
6 - Separating cut in side mem‐
ber
Partial renewal
Partial renewal is possible with
this separating cut.
6.1 Tools
Special tools and workshop equipment required
♦ Compact angle grinder -VAS 5167-
♦ Drill -VAS 5830-
♦ Chisel -VAS 5300/34-
♦ Socket for flow-drill screws -VAS 6426 -
♦ Compact angle grinder -VAS 5167-
♦ Double cartridge gun -VAS 6453-
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
6. Outer side member - Renewal 83