Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
RO: 51 42 55 50
7 Inner B-pillar - Renewal
WARNING
Always observe safety precautions.
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes .
7.1 Tools
Special tools and workshop equipment required
♦ Compact angle grinder -VAS 5167-
♦ Shielded arc welding equipment 250A
♦ Pneumatic sabre saw -V.A.G 1523A-
7.2 Procedure
• Outer B-pillar and outer side member already removed
• Roof side member (part section) already removed
Cutting locations
– Separate weld seam between inner B-pillar and inner side
member using compact angle grinder -VAS 5167- .
– Separate weld seam between B-pillar and roof side member
using compact angle grinder -VAS 5167- .
Audi A8 2003 ➤
Body Repairs - Edition 05.2011
7. Inner B-pillar - Renewal 91
To Next Page
Loading...
